MIAC DFM series

MIAC DFM 111 is a modified surfactant and mineral oil which is designed to provide maximum foam control (defoamer) in oil production system. It prevents foaming even with large quantities of entrapped air spontaneously destroys foam which is already present.
Application – MIAC DFM 111 is directly used and provide effective result when injected at 10 – 100 ppm on turbulence flow section. Effective temperature is below 70 deg C.
Typical Physical Properties:
Appearance: Clear Liquid
Color: Yellowish
pH: 5.5 – 8.0
Viscosity: <1200 cPs
Solubility: Soluble in Water
Relative Density: 0.95 – 1.00 g/cm3
Environmental – MIAC DFM 111 is a non toxic material. No specific hazards under normal use conditions. Please refer to the MSDS.
Packaging – MIAC DFM 111 is packed in 55 US gallon steel drum.
Handling and Storage – The usual precautions for handling chemicals should be observed. MIAC DFM 111 may cause eye and skin irritation. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact wash with water and soap while eye contact flush eyes with water for 15 minutes. Keep container tightly closed.