MIAC CI series

MIAC CI 111 is a cationic surface active agent in a mixture solvent used for Corrosion Inhibitor. The product is a filming amine type corrosion inhibitor that provides excellent protection against sweet and sour corrosions in oil and gas production lines, trunk lines and transport lines. MIAC CI 111 has a good film persistency on metal surface without making gunking problems.
Application – MIAC CI 111 is recommended to be injected continuously at the injection rate of 0.5 – 1.5 liter per million cubic feet of gas while for oil production or crude oil pipe line is recommended to inject continuously at the injection rate of 15 – 50 ppm.
Typical Physical Properties:
Appearance: Clear Liquid
Color: Yellowish Brown
pH (1% solution): 6.0 – 8.0
Viscosity: <100 cPs
Solubility: Insoluble in Water
Relative Density: 0.87 – 0.92 g/cm3
Environmental – MIAC CI 111 is a non toxic material. No specific hazards under normal use conditions. Please refer to the MSDS.
Packaging– MIAC CI 111 is packed in 55 US gallon steel drum.
Handling And Storage – The usual precautions for handling chemicals should be observed. MIAC CI 111 may cause eye and skin irritation. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact wash with water and soap while eye contact flush eyes with water for 15 minutes. Storage condition to keep container tightly closed.