Description
ENVACOTE CCP501 – is an advanced polymer compound with excellent adhesion to metal and high corrosion resistance especially designed for anti-fingerprint primer for coil coating. ENVACOTE CCP501 s low VOC, Environmental friendly product that free from APEO (AlkylphenolEthoxylate), Formaldehyde, Ammonia, Phthalates and Heavy Metals.
Application – ENVACOTE CCP501 is a water based product that easily to be diluted at any ratio with potable water, for spray or continues dipping application is suggested to dilute the product at 1:10 to 1:12 with potable water. The sprayed coil will have excellent ant-finger print (DFT: 1-2 μ), anti-corrosion and good primer (DFT: ~5 μ) for next top coat process. The diluted solution is ready to use without any need for others chemical.
Typical Physical Properties:
Form: Liquid
Color: Milky White
pH: 7.0 – 9.0
Boiling Point: 100 deg C
Flash Point: non-combustible
Water Solubility: Soluble
Relative Density: 1.05 – 1.08
Viscosity: <2000 cPs
Environmental – ENVACOTE CCP501 is non-toxic and biodegradable product. The rate of degradation will be accelerated in moist soil conditions and those with high organic content. Acute toxicity of the primary degradation is accordingly very low, please refer to the MSDS.
Packaging – ENVACOTE CCP501 is optionally packaged in 20 pails or 200 liter OH steel/plastic drum or 1000 liter plastic IBC.
Handling and Storage – ENVACOTE CCP501 is considered non/low irritating to eye and skin, however the usual precautions for handling chemicals should be observed. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact washes with water and soap, while eye contact flush with water for 15 minutes. Ingestion: seek urgent medical care. Keep container tightly closed.