Description
ENVACOL 300 – is polymer emulsion, that provides long lasting binding performance on its application for Dust Control/ Dust Suppressant and Coal Quality Protection. ENVACOL 300 is green product because of free from APEO (AlkylphenolEthoxylate), Formaldehyde, Ammonia, Phthalates and Heavy Metals.
Application – ENVACOL 300 is easy to apply (easy to dilute), sustainable and durable, do not wash away with rain and non-corrosive material.
Each location requires a unique dilution based on coal handling, coal type, size distribution and weather conditions. Training and experience are necessary prior to a successful application. Site and project review is important to optimize application. Dilution Rate (with water) is 1:40 – 80 to 5 – 20 MT Coal.
Application Rate Chemical to Coal is 206 – 52 ppm/MT or 0.0206 . Common application method is using nozzle spray manifold attached on coal conveyor system. Loading capacity determines number of nozzle, spray capacity and pump capacity.
Typical Physical Properties:
Appearance: Liquid Emulsion
Color: White Milky
pH: 5.5 – 7.0
Viscosity: <200 cPs
Solubility: Water Soluble
Relative Density: 1.01 – 1.03 g/cm3
Environmental – All ingredients have been assessed as biodegradable. The rate of degradation will be accelerated in moist soil conditions and those with high organic content. Acute toxicity of the primary degradation is accordingly very low, please refer to the MSDS.
Packaging – ENVACOL 300 is optionally packaged in recyclable 200 liter plastic drum, 1000 liter IBC or Tank containers.
Handling and Storage – ENVACOL 300 is considered non / low irritating to eye and skin, however the usual precautions for handling chemicals should be observed. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact washes with water and soap, while eye contact flush with water for 15 minutes. Ingestion: seek urgent medical care. Keep container tightly closed.