HMN 100

HMN 100 is ‘Dust Suppressant / Dust Control and Spontaneous Combustion Prevention’ that designed specifically to address the dust problem in coal / iron ore handling in quick and effective performance. HMN 100 is a special wetting agent consisting of surfactant and humectants that easily help to improve water wetting performance, create flocculation between fine particle-bigger particles and maintain the coal/iron ore moisture level and therefore will prevent the dust for airborne.
Application – HMN 100 diluted in water with 1:100-200 ratio for solution preparation. For best result using dosing pump is recommended. Solution application rate of 0.50% – 1% by weight/volume.
Training and experience are necessary prior getting successful application. Site and project review are important to do application optimization. Common application method is using nozzle spray manifold attached on coal conveyor system. Conveyor’s load capacity ratio will determine number of nozzle, spray capacity and pump capacity.
Typical Physical Properties:
Appearance: Clear Liquid
Color: Light to Brown
pH: 5.5 – 7.5
Viscosity: <50 cPs
Solubility: Water Soluble
Relative Density: 1.01 – 1.03 g/cm3
Environmental – All ingredients of HMN 100 have been assessed as biodegradable. The rate of degradation will be accelerated in moist soil conditions and those with high organic content. Acute toxicity of the primary degradation is accordingly very low, please refer to the MSDS.
Packaging – HMN 100 is optionally packaged in recyclable 200 liter plastic drum, 1000 liter IBC or Tank containers.
Handling and Storage – HMN 100 is considered non/ low irritating to eye and skin, however the usual precautions for handling chemicals should be observed. Avoid contact with eye and skin by wearing goggles and gloves. For skin contact washes with water and soap, while eye contact flush with water for 15 minutes. Ingestion: seek urgent medical care. Keep container tightly closed.